1.1.0 Release notes
20/03/2023

Notes to accompany this release version of the firmware. Updates to Zone firmware and WebApp are included in this bundle.

New features

• Audio streamer integration
• Client configuration tool
• Set time zone
• Daylight saving automatic adjustment
• SNTP time setting
• Collapse/hide processing associated with output preset
• Select ‘None’ for output state in speaker processing.
• Added global setting for ‘delay units’ in system settings
• Remedial work
• Improved input metering

Firmware update process

• Download the bundle file below
• Browse to Settings > Installer Settings in the WebApp
• Tap Choose file in the Upload Bundle section of the page
• Tap Upload
• Wait for the pop-up to indicate upload was successful
• Reboot the unit
• During the update process, the power light will flash blue as the bundle is unpacked, then flash orange as the firmware is updated.
• After a successful upgrade, Zone will start normally then update any connected ZonePads.

1.1.0 Release notes
20/03/2023

Notes to accompany this release version of the firmware. Updates to Zone firmware and WebApp are included in this bundle.

New features
Audio streamer integration
Client configuration tool
Set time zone
Daylight saving automatic adjustment
SNTP time setting
Collapse/hide processing associated with output preset
Select ‘None’ for output state in speaker processing.
Added global setting for ‘delay units’ in system settings
Remedial work
Improved input metering

1.0.2 Release notes
16/01/2023

Notes to accompany this release version of the firmware. Updates to Zone firmware and WebApp are included in this bundle.

New features
Allow renaming of Zone mic
Milliseconds / metres / feet units selector on delays
Speaker preset order by brand
Bug fixes
SPDIF trim gain not operating
Editing Zone presets in routines didn't allow more than one
Remedial work
ZonePad firmware update not working on some units

1.0.0 Release notes
14/11/2022

Notes to accompany this release version of the firmware. Updates to Zone firmware, presets and WebApp are included in this bundle.

New features
Hide unused zones
Hide unused music sources per zone
Hide unused microphones per zone
Single zone user view
Pre-fade dot meters on all zone sliders
Clearer display of fixed high pass filter band on microphone EQ
Add locked label to HDMI input indicator
Additional 3-band user EQ on every output
Bridge mode on pairs of amplifier outputs
Preset navigation icon is now labelled
Preset view can be re-ordered in edit mode
New metering view in installer page
Zone name now used on output routing views
TCP connections now supported for OSC control
Parameter control in zones now available to OSC
Status feedback now available to OSC
OSC error logging
Speaker presets added for Sub 10, Sub 15, Cuboid 3 and Cuboid 5
APIPA / AutoIP now supported when DHCP server not available
Bug fixes
Line output speaker preset high pass filter frequencies corrected
Remedial work
Stability improved for WebApp connection management
Websocket disconnection behaviour improved
Performance enhancements for preset recalls - recalls throttled
Ethernet link status detection corrected
Front panel startup timing improved
Fan indicator now shows yellow for fault
Scheduled sending of initial preset data for better memory use

0.8.0 Release notes
17/05/2022

Notes to accompany this release version of the firmware. Updates to Zone firmware and WebApp. After performing a bundle upload and restarting the unit, manually reload the WebApp in your browser. From this version onwards, this reload step will be automatic.

New features
Paginated log files for faster viewing on WebApp
Support for up to 8 web clients at once
Support for unlimited presets and routines
Martin Audio speaker presets added
Bug Fixes
Stability relating to presets memory use
Force reload of WebApp when containing out of sync data
HDMI ARC no longer shows on all sources
Remedial work
HDMI ARC control removed due to hardware limitation
Webapp sync time decreased by only loading parameters when needed
Parameter compacting scheduled to reduce startup time
Memory optimisations

0.7.8 Release notes
31/03/2022

Notes to accompany this release version of the firmware. Updates to Zone firmware and WebApp and HDMI subsystem ZonePad firmware updated to 1.1.7

New features
Last octet of IP address display on front panel
Bug fixes
ZonePad 4 touch sensitivity further tuning improvement
Line output section shows when speaker preset is edited
Amp clip indicators corrected
Limiter metering corrected
Limiter time constants now correctly calculated
Limiter graph no longer displays soft knee
Limiter settings now added to Amp speaker presets
Zone 4 / 8 no longer show fan and power supply status

0.7.5 Release notes

Notes to accompany this release version of the firmware. Updates to Zone firmware, ZonePad firmware and WebApp.

New features
Zone local inputs can now be renamed
Bug fixes
ZonePad 4 touch sensitivity improved
ZonePad 4 shows local source correctly
ZonePad firmware update display reliability improved
Product variants displayed correctly in WebApp
Fixes related to system mic and paging mic parameter control
Limiter defaults corrected
Parameter recall improvements and stability

1.08 Release notes
16/01/2023

Notes to accompany this release version of the firmware. Firmware update for SmartAmp 10, 20 and 30.

Remedial work

• Brownout sense sometimes stuck at startup
• Firmware version check added

Firmware update process

• Download the zip file below
• Unzip the file
• Follow the instructions in SmartAmpFirmwareUpdateInstructions.pdf

1.08 Release notes
16/01/2023

Notes to accompany this release version of the firmware. Firmware update for SmartAmp 10, 20 and 30.

Remedial work
Brownout sense sometimes stuck at startup
Firmware version check added

1.07 Release notes
14/11/2022

Notes to accompany this release version of the firmware. Firmware update for SmartAmp 10, 20 and 30.

New features
Added presets for Cuboid 3 and Cuboid 5
Added input linking for crossover presets