Tannoy QFLEX 8

Verfügbarkeit unbekannt

Bestellnr.
145268

8 x 4” LF drivers, 8 x amplifier channels

QFlex 8 is the smallest standalone modular unit available within the QFlex range, comprising of a single column array of 8 x 4" LF drivers, each with its own discrete channel of amplification and integrated DSP.
It can be used as a standalone self-powered column array device for speech only applications in smaller spaces, where only limited steering is required.
For greater degrees of beam control and longer through, full range applications, a larger QFlex model is recommended.

QFlex is a range of digitally steerable, multi- channel, array speaker systems for the professional install market.
QFlex is designed as a complete solution for applications with difficult acoustics, such as houses of worship, transportation hubs, convention centres, conference facilities, shopping malls, performing arts centres and museums.

QFlex is quite revolutionary in that it is able to achieve even coverage and SPL which is maintained across the listening plane. QFlex is able to create an asymmetrical pattern which allows similar SPL's both in the near and far field.
It is able to steer the beam away from surfaces that cause reflections to frequencies beyond 12 kHz, making it the first digitally steerable array to maintain music quality over the desired area of coverage, all in a very architecturally pleasing package.

The intuitive BeamEngine GUI allows the designer to specify target areas.
Based on those target areas a steering algorithm is generated and tailored for that specific area, rather than having to choose from a limited palette of opening and steering angles.

New features introduced on QFlex deliver more resolute safety and monitoring facilities, making it fully compliant in any life safety or mass notification environment.
In addition QFlex has been weatherised for outdoor or harsh environments without compromising on the product’s sleek aesthetic,
making it perfectly suited for large scale transport hub applications such as within airport terminals and major train stations.

Among the key improvements on this front are the addition of Pilot Tone Detection capability, Sentinel SM1 System Monitor and certification to IP53 standards.

Pilot Tone Detection:

An external pilot tone can be used to check the integrity of the cabling and audio signal path between the source and each QFlex loudspeaker, meeting any requirement of BS5839.
Presence of the pilot tone can be checked in software or hardware. Input switching is also possible, should primary input fail (pilot tone not detected), giving full system redundancy.

Sentinel SM1 System Monitor:

For large networks, Sentinel System Monitor provides a complete system-wide fault monitoring and reporting solution for mission-critical applications.
Built on a tried and trusted processing engine, Sentinel keeps a watchful eye on the audio system, and if required, any controlling PCs.
Problems are reported both via relay contacts to the main monitoring panel in your system as well as being shown on Sentinel’s front panel display.
Multiple Sentinels can even monitor each other and the same network simultaneously for systems that require dual-redundant monitoring.

AES Connectivity:

System connectivity has also been greatly enhanced with QFlex now being capable of receiving and transporting digital audio via AES3 stream over long distances.
A new VNET/AES break-in interface is available from Tannoy, allowing the VNET network and AES3 to be transported on the same CAT5 cable.

IP53 Certified:

QFlex has been certified for water and dust protection to IP53 standard by leading test house, Intertek.
This offers complete protection from the amount of dust that would interfere with the operation of the equipment and protection from sprayed water, and since the QFlex enclosure is constructed entirely from aluminium, corrosion is not an issue.

Constant Voltage/ 100 V Interface:

For applications utilising existing front end constant voltage systems, a new 100 V interface is available, allowing for integration into existing constant voltage systems by stepping down signal from 100 V /70 V to line level.

All of these improvements are now available as standard with any QFlex system, except the constant voltage step-down interface and AES break-in interface which are customer specified options.
These additional features reinforce the product’s position as the market-leading steerable loudspeaker solution.


Features:

•Extremely intelligible speech reinforcement
•Densely spaced transducers to defeatthe effects of aliasing
•Intuitive BeamEngineTM GUI
•Integrated cutting edge DSP, network control and amplification
•Networkable with Tannoy VNET products
•Architecturally pleasing
•Fully PA/VA compliant
•AES Connectivity
•Input options for constant voltage systems and Dante digital audio networks
•IP54 Certified (optional)

Applications:

•Auditoria / Lecture Theatres
•Ballrooms and convention Centres
•Concourses
•Houses Of Worship
•Museums & Galleries
•Transport Hubs
•Conference rooms
•Corporate AV
•Performing Arts Spaces
•Retail Spaces & Malls

Configuration:

4" LF: 8
No. of Amp Channels 100W(RMS) @ 4 Ohms: 8
Vertical Dispersion: Variable between 10 - 100 degrees (Asymmetric & multiple beams may also be generated)
Frequency Range: 110Hz - 4kHz
Horizontal Dispersion: 120 degrees
Aiming Angle Limit /- 70 degrees
LF Beam Control Limit 700Hz
Maximum SPL @ 100ft (30m)* 92dB
Column Height 840mm (33")
Column Width 171.5mm (6.7")
Column Depth 150mm (5.9")
Typical Application Distance** 20m (66ft.)
Sample Rate 96kHz
Audio Inputs Analogue & AES/EBU
Weight (including brackets):15.25Kg

Mehr Informationen
Herkunftsland Great Britain
Zolltarifnummer 85182100
EAN 4033653107495
Marke Tannoy