Tannoy CVS4 MICRO (EN54)

CVS 4 Micro

CVS 4 Micro is a full bandwidth ceiling speaker system comprising a 100mm (4”) mid bass driver with a coaxially mounted 19mm (0.75”) high frequency section mounted in a vented, injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The shallow back can equipped CVS 4 Micro is designed to suit those demanding situations where ceiling cavity space is limited but there’s still a requirement for high quality, natural sound.


Features

Coaxially mounted 100mm (4.00") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter
Shallow back can for limited cavity space
High power & high sensitivity with very low distortion Wide, controlled constant directivity dispersion for optimum coverage UV/weather resistant UL94V-0 ABS front baffle
Easily accessible tapping switch on front baffle
Low insertion loss 15W line transformer
Ferrofluid cooled neodymium HF
Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics


Applications

Auditoria / Lecture Theatres
Ballrooms and convention Centres
Bars & Restaurants
Casinos
Concourses
Conference rooms
Fitness Centres & Leisure Facilities
Hotels
Museums & Galleries
Retail Spaces & Malls


System
Frequency Response (-3dB) 1 110Hz - 19kHz
Frequency Range (-10dB) 1 90Hz - 22kHz
System Sensitivity (1W @1m) 2 87dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 102 degrees conical
Directivity Factor (Q) 5.6 averaged 1kHz to 6kHz
Directivity Index (DI) 7.1 averaged 1kHz to 6kHz
Rated Maximum SPL
Average Peak
103dB 109dB
Power Handling
Average Programme Peak
40W 80W 160W
Recommended Amplifier Power 80W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch)
70V 15W / 7.5W / 3.5W / 1.9W / OFF & Low Impedance operation
100V 15W / 7.5W / 3.75W / OFF & Low Impedance operation
Distortion
10% Full Power 2nd Harmonic 3rd Harmonic
250Hz 0.231% 0.112%
1kHz 0.229% 0.253%
10kHz 0.163% 0.025%
1% Full Power 2nd Harmonic 3rd Harmonic
250Hz 0.99% 0.169%
1kHz 0.816% 0.027%
10kHz 0.444% 0.07%
Crossover 2.7kHz
Transducers
Coaxial
Low Frequency 100mm (4.00") mineral loaded cone material
High Frequency 19mm (0.75")
Physical
Enclosure Blind Mount (BM)
Backcan Zinc Plated Steel
Baffle Reflex loaded UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security Toggle Clamp
Cable Entry Options Cable Clamp & Squeeze connector for conduit up to 22mm
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings
UL-1480, UL-2043, CE
Dimensions
Bezel Diameter 213mm (8.39")
Front of Ceiling to Rear of Backcan 98.3mm (3.87")
Front of Ceiling to cable entry centre 46.5mm (1.83")
Template hole cutout size 180mm (7.09")
Net Weight (ea) 2.60kg (5.72lbs)
Included Accessories C Ring, tile bridge, paint mask, cutout template, grille
Optional Accessories Plaster (mud) ring
Notes
1. Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
2. Unweighted Pink noise input, measured at 1m on axis
3. Long term power handling capacity as defined in EIA - 426B test