Tannoy CMS 403ICTE
Verfügbarkeit unbekannt
4" Full Range Directional Ceiling Loudspeaker with ICT Driver for Installation Applications (Blind Mount)
Full range ceiling loudspeaker for installation applications
40 Watts continuous, 160 Watts peak power
4" ICT (Inductive Coupling Technology) point source driver for extended frequency range
Blind Mount enclosure supplied with integral moulded ABS back can
Integrated single unit construction for ease of installation
Adjustable tilt angle with 360° rotation to accommodate difficult loudspeaker placements
High durability design for constant heavy usage in demanding applications
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
Low insertion loss 30 W line transformer with easily accessible tapping switch
Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
Semi matt white finish fits unobtrusively in any environment
Powder coated UV resistant perforated steel mesh grille with dust protection
Removable grille for custom painting
Self-aligning 3 way clamp mounting system
Mounting C-ring and ceiling tile rails included
10-Year Warranty Program*
Designed and engineered in the U.K.
Frequency response (-3 dB) <sup>(1)</sup>
110 Hz - 22 kHz
Frequency range (-10 dB) <sup>(1)</sup>
80 Hz - 24 kHz
System sensitivity (1 W @ 1 m) <sup>(2)</sup>
88 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle
90 degrees conical
Coverage Angle (1 kHz to 6 kHz)
120 degrees
Directivity Factor (Q)
5.26 averaged 1 kHz to 6 kHz
Directivity Index (DI)
6.30 averaged 1 kHz to 6 kHz
Power Handling <sup>(3)</sup>
Recommended Amplifier Power
80 W @ 16 Ohms
Nominal Impedance (Lo, Z)
16 Ohms
Rated maximum SPL
Transformer Taps (via front rotary switch)
Crossover
7 kHz inductively coupled
Transducers
Dual Concentric point source driver
100 mm (4.00") mineral loaded polypropylene
Physical
Safety Features
Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design
Min / Max clamping range:
0.0 mm (0.0") / 20.0 mm (0.79")
Recommended clamp torque: 1.5 Nm
Backcan
Dimensions
Hole cutout diameter
187 mm (7.36")
Net Weight (ea)
3.0 kg (6.61 lbs)
Included Accessories
C-Ring, tile-bridge kit, paint mask, cut-out template, grille
Optional Accessories
Plaster (mud) ring
EAN | 4033653104173 |
---|---|
Marke | Tannoy |