RDL AV-NH1 - Network to Stereo Headphone Amplifier Dante

Features:

Converts Two Dante Network Audio Signals to a Stereo Headphone
Output on Professional Quality 3.5 mm stereo MINI Jack or ¼” Jack
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Front-Panel Output Level Control
Special Software Not Required for Module Setup
Exceptional Low-Noise and Low-Distortion Performance
High Resolution 24 Bit Digital to Analog Conversion
Legendary RDL Analog Filtering Enhances Superb Audio Performance
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
Mounts on a Microphone Stand using an RDL SF-MSM1

Network Connector:
RJ45 Neutrik® etherCON®
Digital Audio Ethernet Protocol:
Dante
Transmission Rate:
100 Mbps
Sample Rates Supported:
44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
Bit Depth Supported:
24 bits
Reference Level:
0 dBFS = 150 mW into 100 Ω

Outputs (2):
Mini-jack or ¼” Jack, Stereo (L and R)
Output Level (maximum):
0 dBFS = 150 mW into 100 Ω
Output Impedance:
< 50 Ω
Frequency Response:
20 Hz to 20 kHz (± 0.5 dB)
THD+N:
< 0.05% (20 Hz to 20 kHz, -20 dBFS); 0.015% at 1 kHz (typ)
Noise:
< -75 dB (below -20 dBFS); < -95 (below 0 dBFS)
Crosstalk:
< -80 dB (1 kHz, -20 dBFS)
Headroom above -20 dBFS:
20 dB

Indicators (3):
Ethernet Link and Speed (2, rear panel); Sync (front panel)
Ambient Operating Environment:
0° C to 50° C
Power Requirement:
PoE Class 0, IEEE 802.3af, or 24 Vdc @ 80 mA, Ground-referenced
Specification Conditions:
Gain/Level: ± 1 dB
Dimensions:
4.23" (10.74 cm) W; 1.68" (4.27 cm) H; 6.29" (15.98 cm) D
Package Type:
Cardboard Box
Package Dimensions:
7 x 4.375 x 2.25 in.
Shipping Weight:
1.36 lbs.
WEEE weight:
1.15 lbs.
Tariff code:
8543.70.9100