PowerSoft DueCanali 804 DSP+DANTE

Power supply
Universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:
Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continous variable speed fan, front to back airflow
General
Fixed frequency switchmode output stage for high grade sound accuracy
Compact 1 RU for reduced rack cost and space
Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog and digital input, audio outputs, alarms and GPIO
Remotely dimmable inputs per channel
Loudspeaker system configuration
Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
Switchable 35Hz / 70Hz high pass filter per channel
Mixed configuration with Lo-Z/Hi-Z systems possible
Bridged mode low impedance per channel pair
Alarms and GPI/O
General Purpose Input/Output alarm interfaces:
dangerous DC in the output power signal
thermal stress
Configurable alarm contact NC/NO per channel
Remote ON/OFF switch
Digital Signal Processing
TI C6000 DSP platform
AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
Delay up to 100 ms for time alignment
Active DampingControl™ for cable compensation
Peak, RMS voltage, RMS current, TruePower™ limiters
Remote management
Control and monitoring through Armonía Pro Audio Suite™
Dedicated Web App
 Remote Control & Monitoring
Via Software:
Attenuation (from 0 dB to 26 dB)
Max output voltage
Output and gain reduction metering
Diagnostics (temperature, fans, …)
Via Hardware:
Attenuation (from 0 dB to 26 dB)
High Pass Filter (35 Hz, 70 Hz)
LoZ/HiZ/70V/100V output selection
Gain (from 26 dB to 35 dB)