Lab Gruppen FA1202
Verfügbarkeit unbekannt
Power amplifier, 2 channels
2 x 120W Commercial Amplifier with Direct Drive Technology and Energy Star Certification
Maximum Output Power
4 or 8 Ω per channel
120 W
Number of Ouput Channels
Number
Minimun Load Impedance
4 Ω mode
4 Ω
8 Ω mode
8 Ω
70 V output mode
41 Ω
100 V output mode
82 Ω
Controls
Front
N/A
Rear
Gain control, input sensitivty select (4 dBu / -10 dBV), load config (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter
Indicators
Power
On (blue), standby (yellow)
Limit (red LED), per channel
Input clip, output limit
Signal (green LED), per channel
>1.23 mV (-56 dBu)
Fault (red LED)
Overheat, DC fault, over current etc
System
Inputs
2 x 3-pin 5.08 mm Euroblock connector
Input impedance
10 kΩ unbalanced, 20 kΩ balanced
Input sensitivity
Balanced: 1.23 V (+4 dBu) or 316 mV (-10 dBV)
Maximum input level
9.75 V (+22 dBu)
Outputs
1 x 4-pin 5.08 mm Euroblock connector
Output circuit type
Class D
Remote connector
2 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power
<0.5%
Frequency response
20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk
>65 dB
Signal-to-noise
>100 dBA
High-pass filter
80 Hz HPF
Circuit Protection
Cooling
Convection-cooled, fanless
Amplifier protection
Thermal protection, over current protection, DC protection, high frequency protection
Load protection
Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage
Main voltage
100-240 V~, 50/60 Hz with active power factor correction
Power consumption 1/8th rated power @ 4 Ω
70 W
Mains connector
Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D)
44 x 218 x 280 mm (1.7 x 8.6 x 11.0")
Weight
2.6 kg (5.7 lbs)
Finish
Brushed black anodized aluminum chassis with black painted steel bottom
Approvals
CE, WEEE, CCC, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0
Marke | Lab Gruppen |
---|