FBT MITUS 112A

Verfügbarkeit unbekannt

Bestellnr.
194522

2-way Active speaker - 12" + 1" - 600Wrms+300Wrms

The FBT MITUS 112A is a two-way bi-amplified speaker system shall incorporate 1 x 12” B&C neodymium woofer with 3” voice coil and 1” exit B&C neodymium driver with 1.7” voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°.

The FBT MITUS 112A shall meet the following performance criteria: Frequency response of 50Hz to 20kHz, Maximum SPL of 133dB, 600W RMS + 300W RMS class D amplifiers. The FBT MITUS 112Aprovides a DSP with 8 EQ presets.

The FBT MITUS 112A features 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, HPfilter and GND lift.
The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 112A speaker to be surface mounted on ceilings and a standard 1.38" speaker stand socket allows the FBT MITUS 112Ato be mounted on speaker stands.


Configuration:
2 Way
Frequency response:
50Hz-20kHz
Low frequency woofer:
12" with 3" VC
High frequency driver:
1" with 1.7" VC
Maximum SPL cont/peak:
126/133dB
Dispersion:
80 x 50 (HxV)
Input impedance:
22kohm
Crossover frequency:
1.5kHz
Input connector:
XLR with link out
Net Dimension (WxHxD):
300 x 660 x 380mm
Net Weight:
20kg
Transport Dimension (WxHxD):
485 x 495 x 750mm
Transport Weight:
22kg
AC Power requirements:
640VA
Built-in amplifier LF/HF:
600/300w RMS
Built-in amplifier peak LF/HF:
1200/600W
Power cord:
5m PowerCon