DPA d:sign 4018 Supercardioid Mic, Black, XLR, 77 cm (30 in) Boom, top and bottom Goosenec

Verfügbarkeit unbekannt

Bestellnr.
161722

Directional pattern Supercardioid
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response 20 Hz - 20 kHz
Effective frequency range ± 2 dB, at 20 cm (7.9 in) MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz
XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz 16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
Distortion, THD < 1% 122 dB SPL RMS, 125 dB SPL peak
Dynamic range Typ. 102 dB
Max. SPL, THD 10% 135 dB SPL peak
Rated output impedance From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001 XLR Adapter: 100 Ω
Minimum load impedance 2 kΩ
Cable drive capability Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
Output balance principle Signal balanced with XLR connector og DAD6001 XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
Power supply (for full performance) MicroDot: Min. 5 V to max. 50 V through DPA adapter for wireless systems
or 48 V phantom power ±4 V with DAD6001-BC XLR adapter
XLR-3M: 48 V phantom power ±4 V
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR Adapter
Connector MicroDot or XLR-3M
Color Black or white
Weight Microdot:
16 cm (6 in): 12 g (0.4 oz)
28 cm (11 in): 20 g (0.7 oz)
43 cm (17 in): 28 g (1.0 oz)
77 cm (30 in): 55 g (1.9 oz)
122 cm (48 in): 67 g (2.4 oz)

XLR-3M:
16 cm (6 in): 75 g (2.6 oz)
28 cm (11 in): 80 g (2.8 oz)
43 c
Microphone diameter 10 mm (0.4 in)
Capsule diameter 5.4 mm (0.21 in)
Microphone length Microdot: 16 cm (6 in), 28 cm (11 in), 43 cm (17 in), 77 cm (30 in), 122 cm (48 in)
XLR-3M: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in).
Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%

Mehr Informationen
EAN 5713055018313
Marke DPA